design and speci cations are each subject to change without notice. ask factory for the current technical speci cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ hd C eee-29 C ) % k capacitance (f) rated voltage mark series identi?cation mark for lead-free products black dot (square) lot number negative polarity marking (C) a0.2 w ( ) reference size l 0 d0.5 h b0.2 (i) k (p) (i) + C 0.3 max. pressure relief ( 0 10 and larger) features endurance: 105 c 5000 h vibration-proof product is available upon request. ( 0 8 mm and larger) rohs directive compliant surface mount type series: hd type: v t 6.3v to 35v : high temperature lead-free refl ow (suffi x:a ? ) y 50v to 100v : standard lead-free refl ow specifi cations di men sions in mm (not to scale) marking example: 6.3 v 330 f marking color: black category temp. range C40 c to +105 c rated w.v. range 6.3 v.dc to 100 v.dc nominal cap. range 1 f to 1000 f capacitance tolerance 20 % (120 hz/+20 c) dc leakage cur rent i < 0.01 cv or 3 (a) after 2 minutes (whichever is greater) tan d please see the attached high temperature lead-free re? ow products list. characteristics at low temperature w.v. (v) 6.3 10 16 25 35 50 63 100 (impedance ratio at 120 hz) z(C25 c)/z(+20 c)33222222 z(C40 c)/z(+20 c)44333333 endurance after applying rated working voltage for 5000 hours at +105 c2 c and then being stabilized at +20 c, capacitors shall meet the following limits. capacitance change 30 % of initial measured value tan d < 300 % of initial speci? ed value dc leakage current < initial speci? ed value shelf life after storage for 1000 hours at +105 c2 c with no voltage applied and then being stabilized at +20 c, capacitors shall meet the limits speci? ed in endurance. (with voltage treatment) capacitance change 20 % of initial measured value tan d < 200 % of initial speci? ed value dc leakage current < initial speci? ed value resistance to soldering heat after re? ow soldering and then being stabilized at +20 c, capacitors shall meet the following limits. capacitance change 10 % of initial measured value tan d < initial speci? ed value dc leakage current < initial speci? ed value size code d l a, b h i w p k b 4.0 5.80.3 4.3 5.5 max. 1.8 0.650.1 1.0 0.35 - 0.20 c 5.0 5.80.3 5.3 6.5 max. 2.2 0.650.1 1.5 0.35 - 0.20 d 6.3 5.80.3 6.6 7.8 max. 2.6 0.650.1 1.8 0.35 - 0.20 d8 6.3 7.70.3 6.6 7.8 max. 2.6 0.650.1 1.8 0.35 - 0.20 e 8.0 6.20.3 8.3 9.5 max. 3.4 0.650.1 2.2 0.35 - 0.20 f 8.0 10.20.3 8.3 10.0 max. 3.4 0.900.2 3.1 0.700.20 g 10.0 10.20.3 10.3 12.0 max. 3.5 0.900.2 4.6 0.700.20 + 0.15 + 0.15 + 0.15 + 0.15 + 0.15 frequency (hz) 50, 60 120 1 k 10 k to correction factor 0.70 1.00 1.30 1.70 frequency correction factor for ripple current j 6.3 v a 10 v c 16 v e 25 v v 35 v rated voltage mark h 50 v j 63 v 2a 100 v (unit : mm) 02 nov. 2013
design and speci cations are each subject to change without notice. ask factory for the current technical speci cations before purchase and/or use. should a safety concern arise regarding this product, please be sure to contact us immediately. aluminum electrolytic capacitors/ hd C eee-30 C w.v. cap. (20 %) case size speci? cation part no. (rohs:compliant) re? ow min. packaging q'ty dia. length size code ripple current (120 hz) (+105c) impedance (10 0 khz) (+20 c) tan d (120 hz) (+20 c) taping (v) (f) (mm) (mm) (ma r.m.s.) (pcs) 50 0.47 4.0 5.8 b 5 12.0 0.12 eeehd1hr47r ??? (1) 2000 1 4.0 5.8 b 7 12.0 0.12 eeehd1h1r0r (1) 2000 2.2 4.0 5.8 b 12 12.0 0.12 eeehd1h2r2r (1) 2000 3.3 4.0 5.8 b 16 12.0 0.12 eeehd1h3r3r (1) 2000 4.7 5.0 5.8 c 21 7.2 0.12 eeehd1h4r7r (1) 1000 10 6.3 5.8 d 33 4.0 0.12 eeehd1h100p (1) 1000 22 8.0 6.2 e 50 2.0 0.14 EEEHD1H220P (2) 1000 33 8.0 10.2 f 74 1.5 0.14 eeehd1h330p (2) 500 47 10.0 10.2 g 94 0.8 0.14 eeehd1h470p (2) 500 100 10.0 10.2 g 94 0.8 0.14 eeehd1h101p (2) 500 63 10 8.0 6.2 e 45 2.0 0.18 eeehd1j100p (2) 1000 22 8.0 10.2 f 65 1.5 0.18 eeehd1j220p (2) 500 33 10.0 10.2 g 80 0.8 0.18 eeehd1j330p (2) 500 100 3.3 8.0 6.2 e 30 2.0 0.18 eeehd2a3r3p (2) 1000 10 8.0 10.2 f 55 1.5 0.18 eeehd2a100p (2) 500 22 10.0 10.2 g 70 0.8 0.18 eeehd2a220p (2) 500 w.v. cap. (20 %) case size speci? cation part no. (rohs:compliant) re? ow min. packaging q'ty dia. length size code ripple current (120 hz) (+105c) impedance (10 0 khz) (+20 c) tan d (120 hz) (+20 c) taping (v) (f) (mm) (mm) (ma r.m.s.) (pcs) 6.3 330 8.0 10.2 f 230 1.5 0.30 eeehd0j331ap (7) 500 1000 10.0 10.2 g 313 0.8 0.50 eeehd0j102ap (7) 500 10 100 8.0 6.2 e 62 2.0 0.30 eeehd1a101ap (7) 1000 220 8.0 10.2 f 160 1.5 0.30 eeehd1a221ap (7) 500 330 8.0 10.2 f 160 1.5 0.30 eeehd1a331ap (7) 500 16 10 4.0 5.8 b 28 12.0 0.20 eeehd1c100ar (5) 2000 22 5.0 5.8 c 39 7.2 0.20 eeehd1c220ar (5) 1000 47 6.3 5.8 d 70 4.0 0.20 eeehd1c470ap (5) 1000 100 8.0 10.2 f 130 1.5 0.20 eeehd1c101ap (7) 500 220 10.0 10.2 g 220 0.8 0.20 eeehd1c221ap (7) 500 470 10.0 10.2 g 340 0.8 0.20 eeehd1c471ap (7) 500 25 4.7 4.0 5.8 b 17 12.0 0.16 eeehd1e4r7ar (5) 2000 10 5.0 5.8 c 28 7.2 0.16 eeehd1e100ar (5) 1000 22 6.3 5.8 d 55 4.0 0.16 eeehd1e220ap (5) 1000 33 6.3 5.8 d 55 4.0 0.16 eeehd1e330ap (5) 1000 47 8.0 6.2 e 56 2.0 0.18 eeehd1e470ap (7) 1000 100 8.0 10.2 f 130 1.5 0.16 eeehd1e101ap (7) 500 330 10.0 10.2 g 238 0.8 0.16 eeehd1e331ap (7) 500 35 4.7 4.0 5.8 b 17 12.0 0.13 eeehd1v4r7ar (5) 2000 10 5.0 5.8 c 28 7.2 0.13 eeehd1v100ar (5) 1000 22 6.3 5.8 d 55 4.0 0.13 eeehd1v220ap (5) 1000 33 8.0 6.2 e 53 2.0 0.16 eeehd1v330ap (7) 1000 6.3 7.7 d8 57 2.0 0.13 eeehdv330xap (5) 900 47 6.3 7.7 d8 57 2.0 0.14 eeehdv470xap (5) 900 8.0 10.2 f 79 1.5 0.14 eeehd1v470ap (7) 500 100 10.0 10.2 g 101 0.8 0.14 eeehd1v101ap (7) 500 220 10.0 10.2 g 220 0.8 0.14 eeehd1v221ap (7) 500 standard lead-free refl ow products(50v to 100v) ??? please kindly accept last shipment : 31/mar/2015 if part number exceeds 12 digits, voltage code is abbreviated as follows; 0j j, 1a a, 1c c, 1e e, 1v v please refer to the page of re? ow pro? le and the taping dimensions. when requesting vibration-proof product, please put the last v instead to p endurance : 105 c 5000 h high temperature lead-free refl ow products(6.3v to 35v) endurance : 105 c 5000 h 02 nov. 2013
|